Product Overview; Package Contents; Compatible Controllers - Bose Professional ControlSpace EX-1280C Guide D'installation Et D'utilisation

Masquer les pouces Voir aussi pour ControlSpace EX-1280C:

Table des Matières

pro.Bose.com

Product Overview

Thank you for choosing a Bose® ControlSpace® EX-1280C conferencing processor. The ControlSpace EX

conferencing solution simplifies audio conferencing design and installation for large meeting areas by offering

direct connection of Dante® microphones, simple and elegant analog-to-Dante microphone converters, interfaces

for all types of audio conferencing, and time-saving algorithms.

Bose ControlSpace Designer software, available as a free download from pro.Bose.com, enables PC setup,

control, and monitoring of the Bose ControlSpace EX-1280C conferencing processor. A separate document, the

ControlSpace Designer Software Guide, can be downloaded as a PDF from pro.Bose.com or found inside the

ControlSpace Designer software help system.

This document includes basic installation information. The information furnished in this guide is intended to

help you install and set up the product, but does not include all details of design, production, or variations

of the equipment. Nor does it cover every possible situation that may arise during installation, operation,

or maintenance. If you need assistance beyond the scope of this guide, please contact your local Bose

Representative or Technical Support specialist. See contact information in the back of this guide.

Each Bose ControlSpace EX-1280C conferencing processor carton contains:

• Bose ControlSpace EX-1280C conferencing processor

• Six (6) green Euroblock connectors (3.81 mm, 6-pin) labeled for audio input

• One (1) green Euroblock connector (3.81 mm, 6-pin) labeled for general purpose input (GPI)

• Four (4) orange Euroblock connectors (3.81 mm, 6-pin) labeled for audio output

• One (1) orange Euroblock connector (3.81 mm, 6-pin) labeled for general purpose output (GPO)

• One (1) black Euroblock connector (3.81 mm, 3-pin) labeled for serial connection

• One (1) black Euroblock connector (3.81 mm, 3-pin) labeled for CC-16 connection

• Sixteen (16) small plastic ties

• IEC power cord (region-specific)

• Installation guide

The EX-1280C is compatible with Bose ControlSpace Remote and third-party controllers such as Crestron® and

AMX®, as well as Bose ControlSpace CC-16 and CC-64.

Introduction

Installation and Operation Guide - 15

Table des Matières