Phone Menu Operation - Pioneer MVH-P8200BT Mode D'emploi

Operating this unit
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the name of a device you want
to delete.
3 Press M.C. to select the device you want to delete.
Press and hold M.C. to switch the BD address
and device name.
4 Use M.C. to select Yes.
Turn to change the menu option. Press to select.
To cancel, select No.
! While this function is in use, do not turn off the
engine.
Add Device (connecting a new cellular phone)
1 Press M.C. to start searching.
! To cancel, press M.C. while searching.
2 Turn M.C. to select a device from the device list.
! If the desired device is not displayed, select
Search Again.
! If five devices are already paired, Memory
Full is displayed and it is not possible to per-
form this operation. In this case, delete a
paired device first.
3 Press and hold M.C. to switch the BD address
and device name.
4 Press M.C. to connect the selected cellular
phone.
While connecting, the circular indicator flashes.
To complete the connection, check the device
name (MVH-P8200BT) and enter the link code on
your cellular phone. If the connection is estab-
lished, a circular indicator appears next to the de-
vice name.
Special Device (setting a special device)
Bluetooth devices that are difficult to establish a con-
nection with are called special devices. If your Blue-
tooth device is listed as a special device, select the
appropriate one.
1 Press M.C. to display the setting mode.
2 Use M.C. to select a special device.
Turn to change the menu option. Press to select.
3 Use a cellular phone to connect to this unit.
While connecting, the circular indicator flashes.
To complete the connection, check the device
name (MVH-P8200BT) and enter the link code on
your cellular phone. If the connection is estab-
lished, a circular indicator appears next to the de-
vice name.
! If five devices are already paired, Memory
Full is displayed and it is not possible to per-
form this operation. In this case, delete a
paired device first.
Auto Connect (connecting to a Bluetooth device
automatically)
1 Press M.C. to turn automatic connection on or
off.
Visibility (setting the visibility of this unit)
To check the availability of this unit from other de-
vices, Bluetooth visibility of this unit can be turned
on.
1 Press M.C. to turn the visibility of this unit on or
off.
! While setting Special Device, Bluetooth visibi-
lity of this unit is turned on temporarily.
Device Information (BD (Bluetooth device) address
display)
1 Press M.C. to display the BD address and device
name.
PIN Code (PIN code input)
To connect your cellular phone to this unit via Blue-
tooth wireless technology, you need to enter a PIN
code on your phone to verify the connection. The de-
fault code is 0000, but you can change it with this
function.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select a number.
3 Press M.C. to move the cursor to the next posi-
tion.
4 After inputting the PIN code (up to 8 digits), press
M.C.
The PIN code can be stored in the memory.
! When you press and hold M.C. in the same
display, the PIN code you entered is stored in
this unit.
! Pressing M.C. in the confirmation display re-
turns you to the PIN code input display, and
you can change the PIN code.

Phone menu operation

Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this op-
eration.
1 Display the phone menu.
Refer to Basic menu operations on page 12.
Section
03
27
En