Remote Control; Warning Signals - Festool CTLC SYS I Notice D'utilisation

► Place the cordless mobile dust extractor in
a dry room inaccessible to unauthorised
users.

12 Remote control

12.1 Intended use of remote control CT-F I
The remote control can manually start / stop a
connected cordless mobile dust extractor.
The user is liable for improper or non-in­
tended use.
12.2 Assembly
Attach the remote control [1-15] to the suction
hose [1-4] using the corresponding fastening
strap [1-20].
To connect the remote control and the
cordless mobile dust extractor, see sec­
tion 9.2.
12.3 LED indicator [1-17]
The remote control's LED indicator displays,
the charge status of the remote control in addi­
tion to the Bluetooth ®
Flashes blue once
Confirmation of the connection button
[1-16] or MAN button [1-18] having been
pressed.
Flashes purple once
The remote control has been reset.

13 Warning signals

Warning Description of warning signal
signal
LED [1-12] Flashes green
Visual
functionality:
Flashes red
Lights up red
Flashes red
The remote control's battery is nearly
empty and must be replaced.
12.4 Changing the remote control's
battery [7]
The remote control is operated using a CR
2032 battery.
If the battery compartment is opened, we
recommend that you replace the seal (20 x
1.3 mm).
► Open the battery compartment closure.
► Replace the battery.
► Close the battery compartment.
12.5 Software update
To check whether a software update that will
enhance the functions of the remote control or
improve existing functions is available, a
Bluetooth ® connection to the Festool Work App
can be established.
► Press the connection button on the remote
control [1-16] until the LED indicator [1-17]
flashes blue.
The remote control is ready for connection for
60 seconds.
► Follow the instructions provided in the
Festool Work App to authorise the secure
connection.
Cause Action
Battery pack empty. Charge the battery pack.
Incorrect battery Use correct battery pack (see sec­
pack. tion 4).
Battery pack under­ Operating temperature, see bat­
cooling. tery pack operating manual.
Battery pack faulty. – Change the battery pack.
– Use the charger to check that the
battery pack is fully functional
once it has cooled down.
Cordless mobile See section 10.4.
dust extractor over­
heating.
Battery pack over­ Leave the battery pack to cool for
heating. approx. ten minutes.
English
25