DOREL Living DA7805 Mode D'emploi page 10

Glass Top Dining Table
DA7805
STEP 6:
Attach large and small metal plates (D & E) to the assembled unit as shown below
using hex caps (1) and joint connectors (2). Use Allen key (6) to tighten joint connectors
(2).
NOTE: Please see below on how to properly install large metal plates (D). The side with
5 holes must be attached to base rail (B).
NOTE: Do not fully tighten the joint connectors. This will facilitate assembly in the next
step.
IMPORTANT
One side of large metal plate
(D) has five holes on it.
Make sure this side is
attached to base rail (B).