Installation; Installing The Mounting Plate - HAMPTON BAY BOSWELL QUARTER 1003 422 689 Guide D'utilisation Et D'entretien

Installation

1

Installing the mounting plate

□ Install the two mounting screws with hex nuts (CC) into the
holes in the round mounting plate (BB). Make sure they line
up with the holes in the back plate portion of the light
fixture (A).
□ Attach the round mounting plate (BB) to the outlet box
using the outlet box screws (not included). Ensure the
mounting screws (CC) protrude away from the junction box
as shown.
2
Connecting the wires
□ Strip 3/8 in. of insulation from the wire ends of the fixture.
□ Using wire nuts (AA), connect the white fixture wire to the
white (neutral) supply wire from the junction box. Then
connect the black fixture wire to the black (live) supply
wire from the junction box.
□ Connect the ground wire from the junction box and the
ground wire from the fixture to the ground screw on the
round mounting plate (BB). Tighten the ground screw to
secure both ground wires to the round mounting plate (BB).
□ Wrap electrical tape (not included) around the wire nuts
(AA), and ensure they are secure. Then push all wire
connections into the outlet box.
BB
Ground screw
AA
5
Please contact 1-855-HB-HAMPTON for further assistance.
A
CC
White
Black
HAMPTONBAY.COM