Table Des Matières; Lock Button; Memory Function - gama.professional iQ perfetto Manuel D'utilisation

LOCK BUTTON

After choosing the speed and temperature of the air flow,
block the power switch in its lock position in order to avoid
accidentally changing the options selected
The "Cool shot" button can be used independently.

MEMORY FUNCTION

The hair dryer has a memorization function that allows preserving the temperature selected for
previous use.
This function allows establishing the temperature and the air flow speed ideal for your need and
hair type, guaranteeing a practical and efficient use.
AUTOCLEANING FUNCTION
This hair dryer features an AUTOCLEANING function to clean its inner components.
How to turn on AUTOCLEANING: once the hair dryer is off, carefully rotate the external filter in a
counterclockwise manner, and pull towards the outside. Then press the button to select the
speed located on the upper part of the device, and keep pressed for 5 seconds. (fig. 7)
fig. 7
(fig. 6)
2
1
5s.
26
The motor will turn on, in reverse, for 15 seconds while the other buttons are not active. At the
end of the AUTOCLEANING session, reposition the external filter and turn on the hair dryer.
If you want to stop the AUTOCLEANING, turn on the hair dryer, switching the power switch from
0 to I. This function will automatically stop and the hair dryer will function normally.
fig. 6
ERROR RECOGNITION /
SELF-DIAGNOSIS (fig. 8)
The hair dryer features an error recognition function. If this function detects problems, the
appliance will not switch on or will stop working.
Depending on the type of error, the LEDs may signal the following:
Led 6
Led 5
fig. 8
Led 4
Led 3
Led 2
Led 1
27