Repair And Warranty - AVO MEGGER BM400/2 Guide De L'utilisateur

The instrument circuit contains static sensitive devices, and care must be
taken in handling the printed circuit board. If the protection of an instrument
has been impaired it should not be used, and be sent for repair by suitably
trained and qualified personnel. The protection is likely to be impaired if, for
example, the instrument shows visible damage, fails to perform the intended
measurements, has been subjected to prolonged storage under
unfavourable conditions, or has been exposed to severe transport stresses.
New Instruments are Guaranteed for 1 Year from the Date of
N o t e : Any unauthorized prior repair or adjustment will automatically
invalidate the Warranty.
Instrument Repair and Spare Parts
For service requirements for M E G G E R ® Instruments contact :-
AVO INTERNATIONAL
Archcliffe Road
Dover
Kent, CT17 9EN
E n g l a n d
Tel: +44 (0) 1304 502243
Fax: +44 (0) 1304 207342
or an approved repair company.
Approved Repair Companies
A number of independent instrument repair companies have been approved
for repair work on most M E G G E R® instruments, using genuine M E G G E R®
spare parts. Consult the Appointed Distributor / Agent regarding spare parts,
repair facilities and advice on the best course of action to take.
Returning an Instrument for Repair
If returning an instrument to the manufacturer for repair, it should be sent
freight pre-paid to the appropriate address. A copy of the Invoice and of the
packing note should be sent simultaneously by airmail to expedite clearance
through Customs. A repair estimate showing freight return and other
charges will be submitted to the sender, if required, before work on the
instrument commences.

REPAIR AND WARRANTY

Purchase by the User
o r AVO INTERNATIONAL
Valley Forge Corporate Center
2621 Van Buren Avenue
Norristown, PA 19403
U . S . A .
Tel: +1 (610) 676-8579
Fax: +1 (610) 676-8625