Activation - De Dietrich AD345 Notice D'installation Et D'utilisation

5 - Activation

• Turn the selector knob to Off and hold the
right-hand button down for 5 seconds until
P441 is displayed (maintenance menu only
for installer).
• Press OK. The screen displays CF01.
CF01 - Correction of room temperature
measurement
If there is a difference between the actual
temperature (taken with a thermometer) and
the temperature measured and displayed
by the unit, this menu can be used to
compensate for the difference (from -4°C to
+4°C in increments of 0.1°C) by changing the
way the sensor measures.
Press + or - to make the required adjustment, then OK to confirm
and go to the next menu.
CF02 - Choice of temperature display
in AUTO mode
Press + or - to make the required adjustment,
then OK to confirm and go to the next menu.
36