Technical Information - DHG BariBar SystemRoMedic Manuel D'utilisation

Installing BariBar
Lower the lift strap and loosen the two screws on either end of the threaded pin. Insert the BariBar's lift point into the
H-adapter and replace the threaded pin. Replace the two screws with the lock washers. Use two 4 mm Allen keys to
tighten the screws.
Installation of BariBar on an overhead lift unit
1 x 90002955 (Threaded pin)
2 x 90001656 (Lock washer 6.1x11.8x1.6)
2 x 90001621 (Screw K6S M6x8)
2 x Allen key 4mm
RiseAtlas/RiseBasic
1
3

Technical information

Weight: 8.6 kg /18.9 lbs
Exterior dimensions: 197 x 682 x 609 mm, 7.7 x 26.8 x 23.9 inches
Lift dimensions, c-c lift loops: 600 x 546 mm, 23.6 x 21.4 inches
Colour: RAL 9006
Material: Steel, aluminium, plastic
SWL: 454 kg, 1000 lbs
Angular displacement, side bars: 45˚
Min. distance lift hooks, c-c lift loops: 366 mm / 14.4 inches
Max. distance lift hooks, c-c lift loops: 720 mm / 28.3 inches
I F U
H-Adapter
Lift point
Screw
Lock washer
Threaded pin
2
4
5