Technical Data - HEITECH SPOT 2600AC Mode D'emploi

TECHNICAL DATA

Description Spot 2600AC
Part No. 04003645
Light bulb 30W COB LED
Input voltage 220-240V 50Hz
Light current 2600 lm
Socket power Max. 3680W
Cable specification H07RNF3G1.5
Cabel length 1,5m
Housing ABS, aluminium
Protection class IP54 (dust and splash proof)
Dimensions 227 x 185 x 85 mm
Weight 1100g
SAFETY INFORMATIONS
• Spotlight is designed exclusively for illuminating work surfaces
indoors and outdoors.
• Read and keep the manual carefully before use.
• Do not operate the emitter or mains cable in case of damage. In
case of damage, contact the dealer or service address. Failure to
do so may result in death from electric shock.
• Do not open the spotlight. Spotlight contains no components that
require maintenance. LEDs are not interchangeable.
• No use in potentially explosive atmospheres. Avoid excessive heat
exposure.
• Never immerse emitters in water or other liquids. Fire and
explosion hazard.
• Keep children away from the lamp and the packaging. Children can
not assess danger from electric current.
• Keep the lens clean. Before cleaning, through a dry cloth, switch
off the radiator and pull out the mains plug.
• Observe the recommended mains voltage at the socket.
• Install spotlights only on stable, non-slip ground.
• Never look directly into the beam!
• Failure to do so may result in product damage or personal injury.
INTEGRATED SOCKET
Do not connect devices with a capacity of more than 3680 watts to
the integrated wall socket. This corresponds to a current of 16 amps
at 230 volts.
ON / OFF
To switch on or off, press the button on the back of the housing.
DISPOSAL
Do not throw electrical appliances in the household
waste! According to European Directive 2012/19 / EC
on waste electrical and electronic equipment and
transposition into national law must be collected
separately and recycled in an environmentally sound
manner. You can find out about ways to dispose of
the disused device at your municipality or city
administration.
DISCLAIMER
HEITECH assumes no liability for direct, indirect, incidental or other
(consequential) damage caused by improper handling or disregard
of the information contained in this operating manual. If used
incorrectly, HEITECH assumes no liability and does not grant any
warranty claims.
WARRANTY
The product is guaranteed for 3 years. Damage resulting from non-
compliance with the operating instructions can not be guaranteed.
HEITECH assumes no liability for misprints.
PRODUCER
HEITECH PROMOTION GmbH
Krefelder Str. 562
41066 Mönchengladbach
GERMANY
04003645 05/2019
The product meets the conditions of the EU.
DE
GB
FR
IT
ES