CAME BPT TH/400 Manuel D'installation Et D'utilisation page 36

Continue in this way until you get to hour 23. Programming for Monday is now complete.
E
1 2 3 4 5 6 7
T3
T2
T1
0 4 8 12
F
1 2 3 4 5 6 7
T3
T2
T1
0 4 8 12
Press button to end programming.
The procedure ends automatically after 10 seconds of inactivity.
Use of the all-purpose programme
The unit includes an all-purpose programme (to be used, for example, when on holiday, etc.)
that can be activated at any time of the current day and remain active until 24:00. It can also
be pre-requested for use on any day of the week. The factory settings give the all-purpose
programme the same profile as that set for Sunday (7), but it can be customised.
A
1 2 3 4 5 6 7
R
T
T3
T2
T1
0 4
ON
16 20
ON
16 20
ON
8 12 16 20
To copy the programme set into
other days of the week, press
0
23
E.
button
Continue to press button
1
7
paste the programme into the days
C
shown one by one by the flashing
segment.
To programme the following days
differently, move forward the day
0
23
using button 1÷7 and repeat the
procedure previously described F.
1
7
C
Setting AUTOMATIC operating
mode.
Press button
The appearance of the block
under the
the programme has been activated.
to
A.
icon confirms that