Cleaning And Maintenance - Kalorik BL 43326 Mode D'emploi

Fax +32 2 359 95 50

OPERATING INSTRUCTIONS
1. Open the bottle and fill with your favorite ingredients. All the
ingredients must be filled below the bottle's "MAX" level mark. For
optimal results please keep the size of the ingredients small.
2. Fasten the blade base on the open end of the bottle.
3. Turn the bottle upside down and attach to the blender base. Turn
the bottle clockwise to secure it to the base.
4. Insert the power plug into the outlet.
5. Press the pulse button to start the blender and keep pressing until
ingredients are completely blended.
6. When blending is completed, unplug the appliance.
7. Remove the bottle by turning counterclockwise to detach it from
the base.
8. Turn the bottle so that the blade base is at the top. Then, carefully
remove the blade by turning counterclockwise.
9. Install the sport lid on the bottle by turning it clockwise on top of
the bottle. You can now take your freshly made drink with you
anywhere! Use the foldable carry hook to easily carry the bottle
and open the top of the sport lid to conveniently drink directly
from the lid!
DO NOT operate the blender without attaching the bottle to the
base first. DO NOT blend continuously for more than 30 seconds. Wait
for the unit to cool down before blending again.
Notes:
 This blender is designed to blend liquids and soft fruits and
vegetables. Examples of ingredients are water, milk, yogurt,
apples, bananas, carrots. Fruits and vegetables should be cut in
small pieces before blending.
 For cool drinks, add small ice cubes and liquid (water or milk) to
the desired ingredients. We recommend a maximum amount of
ice of 0.2lb/90g per cup.
 In case of overload, the blender will automatically shut off. Please
unplug the blender, remove and empty the cup and wait for 15
minutes for the motor to cool down before starting again.

CLEANING AND MAINTENANCE

 Unplug the appliance before cleaning.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you keep
the good numbering when you turn the pages of the I/B.
Don't change the page numbering. Keep the language
integrity. Print only what is inside the frame.
5
Assembly page 5/24
BL 43326 - 120501