Operating Instructions; First Use - SEREN 1228 Mode D'emploi

Operating Instructions

Basic Controls & Functions
Please note the SEREN Toaster will not operate if the Toasting Rack is not correctly
inserted. This is a safety mechanism, if you are experiencing difficulty operating the unit,
please check the Toasting Rack is correctly inserted.
6 Setting Time Control Dial – Control the toasting time of the SEREN. Setting 1 will warm
foods. Setting 6 will produce very highly toasted foods. Turn the dial to the 'OFF' position
to turn off the Power Indicator Light. The following times apply to the unit when started
cold, any residual heat inside the unit will reduce heating time to ensure consistent toasting
results. 1 – 135s, 2 – 160s, 3 – 170s, 4 – 180s, 5 – 190s, 6 – 200s
On/Off Button – Once you have selected your perfect toasting setting and inserted the
Toasting Rack, push the On/Off button to start the heating cycle. Push the button again if
you want to stop the toaster mid-cycle.
Defrost Button – If bread is taken directly from the freezer, use the Defrost Button. It will
automatically extend the toasting time by 10 seconds.
NOTE: The defrost time depends on the timer setting selected
Reheat Button – This setting will heat the unit up for 30 seconds regardless of the time
setting selected.

First Use

NOTE: A slight smell and some smoke may be produced during the very first use of the
appliance. This is normal and will disappear quickly during the initial heating.
• Pull out the sliding Toasting Rack from the appliance
• Open the Spring Loaded Toasting Rack by pushing the Toasting Rack Release Button
• Insert slices of bread in between the Toasting Rack. When inserting more than one piece of
bread, try to make sure they are of similar thickness to ensure the Toast Rack grips correctly.
• Slide the Toasting Rack back into the unit, making sure that it is fully inserted.
If it is not fully inserted, the unit will not turn on.
• Connect the mains plug to the wall socket and press the On/Off button.
• Twist the Time Control Dial away from the 'OFF' setting and select the appropriate time
setting (1-6)
• The red Power Indicator Light will turn on
• When the unit reaches the pre-defined temperature, a beep will sound 10 times and the
heating element will turn off automatically. The Power Indicator Light will stay on until the
sliding tray is removed or the Control Dial is set to the 'OFF' position.
• Pull the Toasting Rack out of the appliance and press the Release Button to open the rack
and remove your toast
NOTE: Be careful as the wire and the toast will be hot
• If at any stage, you want to stop the toasting process, simply push the On/Off button
• Unplug the appliance when not in use.
IMPORTANT: As a safety precaution, the appliance will turn off automatically if the
sliding tray is removed during toasting.
3