TASKPHONE T20 Manuel page 22

Bluetooth - EARBUDS (wireless earphones)
Modern, wireless EARBUDS are attached to the TASK-
PHONE®. They can be activated via the Bluetooth func-
tion. You switch on the TASKPHONE , open with finger
®
pressure in the main menu the settings. In that
menu scroll to „Connected devices (Bluetooth, NFC) „.
You tap on Bluetooth to activate the feature. Then select
the function „New Device „and activate the connection.
The Device starts the search. The EARBUDS should be
near the TASKPHONES. After a short while, the Connec-
tion appears and you can take advantage of use wireless
earphones. For decoupling use the displayed menu.
Touch again to turn it off.
If you want to allow other local devices to scan Blue-
tooth, first turn on the local one Bluetooth, touch „Pair
New Device" and then touch the desired one of the
displayed to establish a connection.
Select SIM card
Touch the button in the main menu Settings, tap on
„Network & Internet", then in the menu on „SIM cards".
Here you can activate the respective slot if you want to
use two SIM cards in parallel. The menu offers you the
option: „Choose a SIM card for mobile data". Tap to power
on the SIM slot. To the disable data connection, tap again
the SIM slot. Note: To activate the data connection plea-
se first insert a SIM card in the TASKPHONE .
®
Wi-Fi
Touch the button in the main menu „Settings". Touch
„Network & Internet", then in the menu on „WI-FI". Touch
the slider to turn on the function. In the following menu
will be the Wi-Fi connections in your environment.
Search for your connection and activate them. You are
asked to do that enter password. To switch off, touch the
slider again.
22