VivaGreen Cuba 1 Manuel D'utilisation page 9

4.2 Turn ON/OFF Product
To turn on the product either press and hold the "On/Off Switch" shown on Fig 1 at the bottom of the product for 2
seconds or use the "On" button of the remote control. To turn off the product either press and hold the "On/Off
Switch" at the bottom of the product for 2 seconds or use the "Off" button of the remote control.
This LED Cube with Bluetooth Speaker has a memory storage function (if the batteries are not fully exhausted) so
that when you press the "On/Off Switch" , the lighting will maintain the same settings. If the battery is exhausted there
will be no memory storage function and it will revert to the default "Smooth" setting.
5. Mode Selection by Remote Control
Before using the remote control remove the small plastic sheet from the battery cover.
Please return this plastic sheet to remote control when not using to save battery power.
Fig 2
5.1 1&2: Brightness intensity button: Change brightness intensity when the light is fixed on one single color.
5.2 3: Light ON/OFF button: Press this button to power the light on and off.
5.3 4: Press this button to turn on and turn off Bluetooth,when the Bluetooth is on, a voice will come out.
5.4 5&6&7&9&10&11&12: Color selection button .When the light is on Press this button to choose your favorite
color as shows on remote control (Seven colors).
5.5 8: Color selection button: When the light is on, Press this button to choose your favorite colors (Total 7 colors)