Télécharger Imprimer la page

OOGarden 78690 Mode D'emploi page 4

Publicité

Les langues disponibles

Les langues disponibles

INSTRUCTIONS ON ASSEMBLY AND USE
WARNINGS
Please read these instructions carefully. Please store them and the packaging
carefully in case questions arise in the future. This product must be assembled by
an adult. This product is designed for private/domestic use only. This product is not
designed for commercial/industrial use. The use of the product requires certain
capabilities and skills. Always adjust according to the age of the user and use for
the purpose it has been designed for.
TECHNICAL SPECIFICATIONS
Item:
Soccer goal Freekick with target shot
Item number:
CBL701C-9
Dimensions when assembled: 300 x 160 x 100 cm
Purpose:
Soccer goal for versatile shooting and goalkee -
per training.
If you have assembly problems or would like further information on the product,
please contact customer service at (cdts@cdts.fr).
CONTENTS
Designation
1
L Tube
2
L Tube
3
Straight tube
4
Straight tube
5
Straight tube
6
Straight tube
Support tube
7
Support tube
8
9
Net
10
Fastener
Screws
11
Security lock
12
Pegs
13
Other items included are meant to facilitate safe transportation and are not re
quired for the installation and use of the product.
SAFETY INSTRUCTIONS
• WARNING! Not suitable for children under 36 months. Long cord. Strangulati-
on hazard.
• Prior to use, check all parts of the goal for damages and correct assembly.
In this regard, it is important to check the connecting elements and screw
connection for stability and t. Any sharp edges that might have formed must
immediately be removed! Small parts. Choking hazard.
• Warning: do not climb on the goal frame or net or hang from the goal posts.
There is a serious risk of injury!
• Children should only use the product when they are under adult supervision.
• No liability is assumed for damages resulting from incorrect application of the
instruction manual.
All images are examples of the design.
Quantity
Spécification
4
67cm
67cm
2
121cm
2
121cm
2
93cm
2
33cm
2
80cm
2
80,5cm
2
1
16
ø
5cm x
0,6
4
16
(INCLUDED IN THE TUBES)
18cm
5
INSTRUCTIONS ON ASSEMBLY
Notice: Lubricate the connection assemblies on the narrow ends a bit before
starting the assembly. That facilitates the assembly and extends the durability
of the product!
1. Assembly of the goal frame
Assemble the goal frame as indicated in g. 1. Observe that you use the respec
tively numbered tubes. Observe that you put the sleeves net on the tubes before
assembling.
2. Assembly of support tubes
Assemble the support tubes with screws n°11, tubes n°7 and n°8 as indicated
in g 2.
3. Assembly of the target shot
Pay warning that the clips are on the back side of the target shot so that they
cannot be hit by the ball.
4. Stand locking of the goal
Finally x the goal frame by means of the pegs on the ground. Ascertain that the
ground is suitable for the application of pegs (e.g. no water pipes for sprinkler
devices!). Make sure that the pegs are completely driven into the ground and
have rm position. Avoid protruding fastenings (risk of stumbling). On too hard
grounds the goal must be saved by appropriate measures in another way against
overturning in order to prevent risk of injuries. Never play with an unsecured goal
or never leave the goal unsecured respectively.
USAGE INSTRUCTIONS
• Only set up the goal on level ground.
• Please keep a minimum distance of at least 3 m to any surrounding obstacles.
• Secure the goal to keep it from toppling over – even if not in use.
• Avoid exposing the product unnecessarily to bad weather conditions. Keep it
in a cool and dry storage area.
• Check for any rust on the product and remove it immediately. Pushing together
the metal parts could lead to the protective layer being scratched and rust
developing.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and after
each use. Do not make any structural changes. For your own safety, please use
original spare parts only. If parts become
should develop, the product may not be
contact our service team (cdts@cdts.fr).
Store the product in a safe place where it is protected from the elements, cannot
-
be damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point provided in your area. Local waste management companies will be able to
answer your questions on this.
SERVICE
We make every e ort to deliver faultless products. If faults do arise however, we
put just as much e ort into rectifying them. You can find numerous information
on the product, replacement parts, solutions to problems and lost assembly ma -
nuals by contacting customer service at cdts@cdts.fr
damaged or if sharp edges or corners
used any more. If in any doubt, please
Store the product in a safe place where
-
4/4

Publicité

loading