CLAS OC 0714 Mode D'emploi page 4

OC 0714
BODYWORK HOLDER
Read these instructions carefully before installing, operating, maintaining or repairing
this tool. Keep these instructions in a safe and accessible place.
This product is intended to support work on doors, fenders, bonnets and bumpers. Do not
use this tool outside of its intended purpose. Never modify the tool for any other purpose
or use.
WARNINGS
Warning: to prevent personal injury.
• Always wear safety equipment, glasses and clothing when using this product.
• Study, understand and follow all instructions provided with this product.
• Failure to comply with all warnings and operating instructions may result in damage and
serious injury or death.
• Never use this tool for an application other than the one for which it was designed.
• Use only accessories designed for this tool.
• Never alter or modify this tool in any way.
• Incorrect use and/or maintenance of the tool, its modification or use with accessories
not designed for this purpose may result in serious or fatal injuries.
• Always choose the right accessories of the right size and design for the job you are
trying to do.
• Always work in a clean, safe, well-lit, organized and well equipped area.
• Do not start repairing without the assurance that the vehicle is in a safe position and will
not move during repairs.
• Before using the product, when unpacking, make sure that all parts are included. (see:
exploded view below).
SPECIFICATIONS
• Ideal for working on doors, fenders, hoods and bumpers.
• foam supports
• length of supports: 100cm
• adjustable distance by chain
• spacing range: 45 to 90cm
• height: 95 to 48cm depending on the distance
• folded dimensions: 102x107x11cm