Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Video-iris Zoom Lenses | Installation Instructions
Level and ALC Adjustments:
1.
Select an adequately illuminated scene.
2.
Set the "ALC" control to its mid-position.
3.
Turn the "LEVEL" control to "L" until the iris closes. (The monitor
shows a low contrast, grainy picture).
4.
Gradually turn the "LEVEL" control towards "H" to open up the iris.
The picture contrast improves and the noise reduces. The camera's
Automatic Gain Control is active.
5.
Set the "LEVEL" control to the position at which the noise has
disappeared and the larger white parts of the picture are just not
washed-out.
Cable connection
Video-iris
Pin
Polarity
1
Supply Voltage
2
Not Used
3
Video Signal
4
Ground
Zoom, Focus and Iris
Potentiometer-Preset (only Pre-pos. Models)
Pin
Connection
7
Pot. Supply
1
Zoom Wiper
8
Pot. Return
3
Focus Wiper
Bosch Security Systems | 2004-01
2
1
4
3
Video-iris
Video-iris
Connector
Connector
(Solder view)
(Solder view)
2
8-Pin Female
5
4
Connector
1
3
6
(Solder view)
7
8
EN | 4
Publicité
Table des Matières
