Specifications; Accessories Included; Troubleshooting - BC Acoustique SP-102-BT Mode D'emploi

Specifications

Amplifier section
Class D
Output power 2x25W into 4Ω
Total harmonic distortion < 0.1%
Signal noise ration > 86dB
Frequendy response: 85Hz-20KHz
Auto OFF
No signal 60 minute go into standby
Drivers
2x 3'' full range
Highpass filter
Large: 20Hz - 22KHz
Small: 120Hz - 22KHz
Bluetooth 4.2 connection
©
Transmission range about 10m without obstacle.
Active speaker connectors:
1x Line in mini-jack input
1x RCA input (Phono or Line)
1x Optical input
1x RCA mono subwoofer output
1x Speaker output for the slave
1x Detachable power cord
Passive speaker connector:
1x Speaker input
General
PRODUCT
Dimensions (W×H×D): 110 x 214 x 214 mm
Weight: 2,5 kg unit
BOX
Dimensions (W×H×D): 335 x 290 x 280 mm
Weight: 6,1 kg
EAN CODES SP-102-BT
Bambou Natural (BN):
Bamboo Black Glossy (BB):
Bamboo Red Glossy (BR):
Walnut (WA):

Accessories included

1x Detachable power cord
1x AC adapter
8x Rubber feet (4 for each speaker)
4x Spikes (2 for each speaker)
1x RCA stereo cable
1x Speaker cable
1x Remote control RC-SP1
1x Manual
0634154407189
0634154407172
0634154407165
0634154407158
11

Troubleshooting

Here you will find a number of fault description and possible
solutions we invite you to read in order to ensure the possibility
of an actual breakdown of your device.
The unit does not turn on
- Make sure the power cord is properly connected.
- Make sure the plug is fully inserted into the wall outlet and
there is power.
There is no sound
- Make sure the unit is not in standby mode (red led).
- Check that the source component is connected properly.
The remote control does not work
- Check that the batteries have not expired.
- Make sure nothing is blocking the remote sensor.
Bluetooth - The sound stops or there is noise
©
If a device such as a microwave oven or wi-fi transmitter
generates electromagnetic waves near the 2.4 GHz band, it can
affect the connection or broadcast quality. In this case, install
the speakers at a greater distance from this unit.
Bluetooth - The transmission is interrupted
©
- The device connected to the SP-102-BT active speaker is
perhaps too far. The approximate distance transmission
is about 10m without obstacles.
In case the above solutions do not remedy your problem, check
our FAQ section (Frequently Asked Questions) on our website:
www.bc-acoustique.com
For repair, during or after the warranty, please contact your
dealer.
To obtain warranty service and technical support, thank
you to register your product online on the website
www.bc-acoustique.com at the product registration section.
BC ACOUSTIQUE
14 Avenue de l'Europe
77600 Bussy Saint-Georges - France
www.bc-acoustique.com