Hesperide NINDIRI 132580 Mode D'emploi page 6

Table d'appoint
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Tightening
The assembly parts of your product become loose over time. Think of tightening them regularly.
Everyday maintenance
Your product is subject to external elements, it must therefore be regularly cleaned.
Remove stains immediately.
Clean with a damp cloth soaked in warm soapy water (or hot water for more marked dirt) or a
specific, adapted product.
Rinse thoroughly.
Finish with a clean, dry cloth.
If in doubt, consult a reseller or the material sheet on the Hesperide.com website.
In the absence of regular cleaning your product will imperatively deteriorate.
Weather conditions (wind, rain, snow, hail, salty winds)
The outdoor furniture is designed to be used in normal outdoor weather conditions. Strong
climatic hazards or exceptional weather conditions can have repercussions on the look, correct
use and lifespan of the product. It is strongly advised to use tarpaulin with a ventilation system
during the season when the furniture remains outside.
Rain and humidity
If it is left out in water, the furniture will take several days to dry. Nothing abnormal in that, but
ensure that you wipe it to prevent the water from stagnating on it. The presence of prolonged
humidity speeds up the product ageing and favours the appearance of rust indeed mould.
Temperature conditions
Outdoor furniture is not made to bear low temperature conditions, even less winter temperatures,
which are likely to alter its correct operating and its surface condition. it is also sensitive to
ambient humidity. It is therefore advised to store it in a dry, ventilated and closed place. Putting a
tarpaulin on it is therefore not necessary. Before any siding, clean and dry the products well, to
prevent the appearance of unpleasant odours or
mould.
If you
do not have a dry, ventilated and closed place, the use of tarpaulin with a ventilation system is
essential to cover the furniture that remains outside. A protective tarpaulin in fact reduces the
impact of external aggressions (damage due to trees, animals, pollution,...) over its lifespan. If
the floor is damp, it is advised to insert a wedge between the floor and the feet to avoid a transfer
of humidity. In the event of a table that spends winter outside, giving a slight angle also prevents
water and dead leaves collecting on the tarpaulin.
In the event of prolonged non-use, if the storage and tidying away recommendations are not
followed, the result will be an accelerated deterioration to its surface condition and its correct
operating.
Protection of the screws and bolts and the structure
Steel is a material that exposed to external elements (humidity, salty winds) will naturally oxidise.
To prevent the appearance of rust, our steel furniture is delivered original with an Epoxy
treatment. However this layer gradually disappears under the effect of external elements and
must be renewed regularly. For this, apply an anti-rust aerosol at least once at the beginning and
end of the season (available in hardware shops or DIY shops). Increase the treatment frequency
every 3 months for furniture exposed to salty sea winds.
The screws and bolts must also be the subject of such a treatment.
If the rust appears despite all that, it can easily be treated and removed with the usual products
such as white vinegar or citric acid. A cloth soaked with car polish can also allow you to remove
the rust spots. Finish with an anti-rust spray to protect the furniture, to apply regularly.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Nindiri 132581Nindiri 149200aNindiri 149200c

Table des Matières