Fan Control; Light Control; Operation - Furrion FHO23SACR-BL Consignes D'utilisation

3. Mark centerline of range hood on the wall. (Fig. 3)
NOTE: The minimum vertical distance to combustible
material above the range cooking top is 191/2 inches
when installed with a range hood, provided the overhead
construction does not extend 1611/16 inches from the rear
wall. (Fig. 4) This range hood will work with cooktops and
ranges with input rating up to 22,500 BTU.
⁵⁄8"
⁵⁄8"
4³⁄4"
4³⁄4"
23⁹⁄16"
Fig. 3
Fig. 4
4. Mark and cutout a through-hole on the wall according to
the dimensions outlined in Fig. 3.
5. Connect the vent hood white wire negative (-) to the
incoming power supply negative (-) wire and the vent
hood black wire positive (+) to the incoming power supply
positive (+) wire. (Fig 5)
NOTE: Make all electrical supply connections in
accordance with local and/or applicable codes.

Operation

Fan Control

Press the fan button once to turn on the fan, press twice to
turn off. (Fig. 10)
Fig. 10
3³⁄4"
3³⁄4"
10⁷⁄8" Range Hood
Outline
10⁷⁄8" Range Hood
19¹⁄2"
Outline
23⁹⁄16"
19¹⁄2"
Center of
Range Hood
Center of
Range Hood
Fig. 5
6. Insert vent collar at back of the range hood into the cutout
area and fix the range hood onto the top cabinet with the
four screws provided. (Fig. 6 and Fig. 7)
NOTE: DO NOT over tighten the screws.
Fig. 6
7. Verify that the blower housing and ductwork are free of
debris and fan blades spin freely.
8. Replace the grill cover to the range hood and press the
release tabs until you hear a click. (Fig. 8) The grill cover is
securely attached to the range hood. (Fig. 9)
Fig. 8

Light Control

Press the light button once to turn on the light, press twice to
turn off. (Fig. 11)
Fig. 11
Fig. 7
Fig. 9
5