Safety Instructions; Electrical Safety - Sharp KD-GHB7S7PW2-DE Manuel D'utilisation

1. SAFETY INSTRUCTIONS

This section contains safety instructions that will help
protect you from risk of personal injury or property
damage. Failure to follow these instructions will void
any warranty.

1.1. Electrical Safety

• The appliance must not be supplied through an
external switching device, such as a timer, or
connected to a circuit that is regularly switched on
and of by a utility.
• Do not touch the power plug with wet hands. Always
pull the plug to unplug the product, otherwise, there
will be risk of an electric shock.
• Connect the dryer to a grounded socket with fuse
protection. The earth connection must be installed
by a qualiied electrician. Our company cannot be
held responsible for damages/losses resulting from
using the dryer without an earth connection as
required by local regulations.
• The voltage and the allowable fuse protection are
indicated on the type plate.(For the type plate,
please see 3. Overview)
• Voltage and frequency values indicated on the
type plate must be equal to the mains voltage and
frequency value in your house.
• Unplug the dryer when it is not used for an
extended period, and before installation,
maintenance, cleaning and repair, otherwise, the
dryer may get damaged.
• The plug socket must be freely accessible at all
times after installation.
A damaged power cord/plug can cause ire or
give you an electric shock. When damaged it must
be replaced, this should only be done by qualiied
personnel.
EN - 5