PRO-POINT 8548976 Manuel D'utilisateur page 13

8548976
Problem
The unit is
not heating.
The heater is
producing a
burning smell.
Visit www.princessauto.com for more information
Industrial Ceiling Mount Garage
Heater, Low Profile
Probable Cause(s)
Overheat protection has
temporarily deactivated
the heater.
Breaker / Fuse has
been tripped.
Check and ensure that
there are no combustible
materials within 3 feet
(0.9m) surrounding
the heater.
A drop of oil fell on the
heating coil during the
manufacturing process.
It will quickly evaporate
and should not
occur again.
Ensure a minimum
clearance of 3 feet
(0.9m) from both sides
and rear of the heater to
adjacent walls.
Suggested Solution(s)
Turn the heater OFF;
switch off the circuit
breaker. Wait 10 minutes
before turning on
the heater.
Check your electrical box
to confirm the breaker has
not been blown. This may
occur if the receptacle is
shared between other high
consumption appliances.
Remove any combustible
items from the heater.
Ensure the room in which
the heater is situated is
well ventilated.
Reposition the heater so
that there is enough space
around the heater to the
adjacent walls.
V 1.0
13