Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Power / Delay Off
1 POWER / DELAY OFF BUTTON
Power Button Function
-
Button will turn power on and off for entire hood (fan and lights).
- Hood will remember the last speed and light level it was turned off at.
(Example: Press
Button to turn off hood when on fan speed 4 and high lights. Press
again and the hood will turn back on at speed 4 and high lights level.)
Delay Off Button Function
- With the fan on press and hold
minute delay off timer will start.
+
remaining until the fan and lights automatically turn off.
- Pressing
Button while Delay Off Function is enabled will turn the hood off and cancel the Delay
Off Function.
2 SPEED SELECTION BUTTON
Fan Speed Decrease Button
- Press this button to decrease fan speed. 5, 4, 3, 2, 1.
- If fan is On Speed 1 and this button is pressed, fan will power Off.
Fan Speed Increase Button
- Press this button to increase fan speed. Fan On, 1, 2, 3, 4, 5.
- If hood is Off and this button is pressed, fan will turn On Speed 1.
3 LIGHTS BUTTON
- Lights are two levels, High and Low.
- From off, press one time for High. Press again for Low. Press again to power lights off.
4 DISPLAY INDICATORS
Baffle Filter Clean Reminder (always enabled)
- After 30 hours of fan usage, the
clean the baffle filters.
- To reset: With hood off: hold the
confirming the 30 hour timer has been reset.
Adjust 5 Speed Levels
Display (speed level, delay off, filter clean/change)
Button for two seconds. The fan will change to speed 1 and the 5
LEDs will illuminate and slowly blink in accordance with the time
button indicator will begin to slowly blink indicating it is time to
button for three seconds. All LED indicators will blink two times
11
Lights On/Dim/Off
Button
Publicité
Table des Matières
