Objecto W9 HW-54 Mode D'emploi page 10

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EMPTY
H/M/L/S L
2.
Set the mist level
To set the mist level, press the Power/Mist Setting button
is pressed, the setting cycles from H (High) → M (Medium) → L (Low) → SL (Super
Low). The indicator is green when set to H (High), blue when set to M (Medium) or
orange when set to L (Low) and it flashes orange when on SL (Super Low).
*
The humidifier should normally be used on any setting except H (High). Using it
on H (High) may create excessive humidity. Be careful when using it on high.
H (High) → M (Medium) → L (Low) → SL (Super Low)
Mist setting
H
(High)
M (Medium)
L
(Low)
SL (Super Low)*
* Timer function
Press the Power/Mist Setting button
it activates the timer function, which automatically turns the power off after 5
hours.
3.
Stop the humidifier
Press the OFF button
*
After misting stops, the fan runs for about 1 minute before the humidifier comes
to a complete stop.
If the Water indicator turns red during operation
When the Water indicator is lit red, it indicates that the water level in the water
tank is low.
When the water level in the water tank is low, the alarm beeps five times and the
Water indicator lights up red.
Mist level indicator
Water indicator
Power/Mist Setting button
OFF button
Mist level indicator color
Lit green
Lit blue
Lit orange
Flashes orange
to stop operation.
10
. Each time the button
and when it is set to SL (Super Low),
English

Publicité

Table des Matières
loading

Produits Connexes pour Objecto W9 HW-54

Table des Matières