Release Air; Storage; Repair And Maintenance; Technical Data - X4-Life ISUP Stand Up Manuel D'utilisation

Release air

• Remove all accessories e.g. the fins
• Make sure that the SUP is free of dirt. (If necessary, clean it first).
• Open the twist lock.
• Push the valve to the side and the air starts to escape. To ensure that all air escapes,
you can fold the board and/or sit on certain places.
• When all air has been released, close the twist lock.

Storage

Remove all accessories before folding.
Fold the SUP from the nose down so it is as flat as possible.
The SUP must be completely dry and clean and must not contain any air. It is recommended
to store the SUP and its accessories in the backpack included in the delivery. Store the SUP
in a clean and dry place. Do not expose it to high or low temperatures during storage.

Repair and Maintenance

A repair kit is included with patches and a valve attachment tool.
The patches can be used to repair minor damage. Use a suitable strong adhesive.
If the SUP loses air through the valve, you can use the tool to retighten it. Turn
clockwise to tighten the SUP.
In case water got into the SUP, you can remove the valve completely with the tool and
thus drain the water.

Technical data

Recommended pressure: 12­15 PSI, Productsize: 323 x 81 x 15 cm, Weight board: 8.5 kg,
Material: DWF, PVC, EVA

Box contents

Stand up paddle board, 1x paddle, 3x finns, 1x backpack, 1x air pump, 1x safety leash, 1x
repair kit, user manual
10