ENJOYABLE WARMTH IH D Serie Manuel Du Propriétaire page 19

Owner's manual
ON/OFF button (1)
Press the ON/OFF (1) button to turn the heater on or off.
Clock button (6)
Use this button to set the current time. It will indicate 00:00 after placing
the batteries. The time can be set as follows:
1. Press the Clock (6) button; the hour will flash; press the Up or
Down (4) button to change the hour setting.
2. Press the Clock (6) button again; the minute will flash; press the
Up or Down (4) button to change the minute setting.
3. Press the Clock (6) button again; the second will flash; press the
Up or Down (4) button to change the second setting.
4. Press the Clock (6) button again in order to save the current time.
The time will stop flashing and the current time is indicated.
Level button (3)
The Level (3) button will cycle the power setting from 100% to 75%, 50%,
25% and back to 100%. Alternatively, the Up and Down (4) buttons can be
used to raise the power from 25% → 50% → 75% → 100% or lower the
power from 100% → 75% → 50% → 25% respectively.
IH-xxxx-D series infrared heater
Page 19 / 198 Version 1.3