BGS technic 8980 Mode D'emploi page 6

CONTENTS
1 Measuring tube, angled, with rubber cone
2 Measuring tube, straight, with rubber cone
3 Measuring hose with spark plug thread
M14x1.25 and M18x1.5
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
SPECIFICATIONS
Unit
Resolution
Accuracy
Temperature coefficient
Working temperature
Humidity range
Spark plug thread adapter: M10x1 / M12x1.25 / M14x1.25 / M18x1.5
Pressure range: 0.1 - 20.6 Bar (2.0 - 299.5 PSI)
Power: 1.5V AAA Battery (incl.)
Auto-Off time is about 5 minutes if the system is no operation and no pressure connected.
The measured pressure will be memorized. Memory for up to 16 measurements.
Backlight ON/OFF controllable, back light disabled when the system turns ON.
Automatic zero calibration, runs automatically when pressure gauge switching on.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Digital Compression Tester
kPa
1
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
4 Spark plug thread adapter M14x1.25
5 Spark plug thread adapter M12x1.25
6 Spark plug thread adapter M12x1.0
7 Pressure gauge
MPa bar
0.001 0.01
<± 0.5%
<± 0.01% FS/°C
< 0 bis 50°C
< RH 65%
BGS 8980
psi kg/cm²
0.1 0.01
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed