Ingersoll Rand EC24N Manuel D'instructions page 6

OPERATION
Do not drop or abuse the Controller.
Whenever a Controller is not being used, position the
Power Switch to the "OFF" position and unplug the
power cord.
MODEL EC24N and EC24N–ESD CONTROLLER
SLOW START ADJUSTMENT
A sudden increase in the speed of the screwdriver bit
occurs within the first five seconds of start–up when
using the SLOW START ADJUSTMENT feature
described below. This occurs each time the screwdriver
is operated.
Use of the SLOW START ADJUSTMENT lets the
screwdriver bit rotate slowly for a brief period of time (zero
to five seconds) to provide easier alignment and
engagement of the screw threads.
SAVE THESE INSTRUCTIONS. DO NOT DESTROY.
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
(Dwg. TPD1833–1)
INGERSOLL–RAND
PROFESSIONAL TOOLS
Allen & Martinsville Roads, PO Box 1776
Liberty Corner, NJ 07938
5
1. To use the SLOW START feature, turn the SLOW
START ADJUSTMENT clockwise. This lets the
screwdriver bit start rotating at a slow speed and
suddenly come up to full speed. Increased clockwise
adjustment allows the the screwdriver bit to turn at a
slow speed for a longer period of time before
suddenly coming up to full speed.
2. To cancel the SLOW START feature, turn the SLOW
START ADJUSTMENT counterclockwise until it
stops. This cancels the SLOW START feature and the
screwdriver bit will start rotating at full speed.
SPEED ADJUSTMENT
Use of the SPEED ADJUSTMENT changes the free speed
of the screwdriver. The free speed can be adjusted from
full rated speed (turn SPEED ADJUSTMENT to full
clockwise position) to 70% of full rated speed (turn SPEED
ADJUSTMENT to full counterclockwise position).
POWER SWITCH
The POWER SWITCH turns the power on or off. When
power is on, a light illuminates the push–button of the
switch.
SCREWDRIVER CORD RECEPTACLE
The SCREWDRIVER CORD RECEPTACLE connects the
screwdriver power cord to the controller.
DO NOT ATTEMPT TO REPAIR THIS
TOOL.
All repairs and maintenance of the Controller and its cord
must be performed by an authorized servicenter. See Form
6647 for the servicenter nearest you.