GreenWorks Tools G40AB Manuel D'utilisation page 8

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
SPECIFICATIONS
Type
Voltage
AIR volume
Air speed
Weight (Battery
Pack not included)
Battery Pack
Charger
Sound pressure
level
Sound power level
Vibration level
DESCRIPTION
See Figure 1.
1. Battery Release Button
2. Cruise Control Lever
3. Trigger
4. Blower tube
5. 40V Lithium-lon battery
ASSEMBLY
UNPACKING
„ Carefully remove the product and any accessories
from the box.
„ Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
„ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
„ If any parts are damaged or missing, please call your
Greenworks Tools service centre for assistance.
Do not use this product if any parts on the Packing
List are already assembled to your product when you
unpack it. Parts on this list are not assembled to the
product by the manufacturer and require customer
installation. Use of a product that may have been
improperly assembled could result in serious personal
injury.
English (original instructions)
2400807
40V DC
7.62 m³/min
162 KM/H
1.9 kg
29717/29727
2904607/2904707
LpA: 87.6 dB(A) k: 3 dB(A)
LwA: 99.7 dB(A)
K: 3.0dB(A)
ah: <2.5 m/s 2 ; K: <1.5 m/s
WARNING
ASSEMBLING THE BLOWER TUBE
See Figure 2, 3, 4
To prevent accidental starting that could cause serious
personal injury, always remove the batterypack from
the tool when assembling parts.
„ Align either of the grooves (6) on the tube (4) with the
tabs (7) on the blower housing. Slide the tube onto the
blower housing until the tab engages the grooves.
„ Turn the tube in the direction of the arrow until both of
the tabs slide into the lock positions (8).
„ To install the Front tube (A) to Rear Tube (B), line
the hole on the front tube to the tab on the rear tube.
Once aligned slide the front tube on to the rear tube
until the tube is secured.
TO INSTALL/REMOVE BATTERY PACK
2
See Figure 5.
„ Align the ribs of the battery pack with the mounting
slots in the blower's battery port.
„ Insert the battery into the battery opening until the
battery release button locks into place.
When placing battery pack in the blower, be sure the
raised ribs on the battery pack align with the grooves
in the top of the blower. Make sure the battery is fully
seated, and it latches into place properly. Improper
installation of the battery pack can cause damage to
internal components.
TO REMOVE BATTERY PACK
See Figure 5.
„ Press and hold the latch button (9) with firm grip.
„ Grasp the trigger handle (10) firmly. Pull the battery
pack out of the handle.
Always take care of your feet, children, or pets around
you when pressing the battery release button. Serious
injury could result if the battery pack falls. NEVER
remove the battery pack when in a high location.
5
WARNING
CAUTION
WARNING