Other Consumer Safety Information - Weston MH08 Serie Manuel D'instructions

20. Grinding blade is sharp. Handle
carefully.
21. CAUTION! In order to avoid a hazard
due to inadvertent resetting of the
thermal cut-out, this appliance must
not be supplied through an external
switching device, such as a timer, or
connected to a circuit that is regularly
switched on and off by the utility.
22. Do not run grinder without meat in the
head. Severe damage to the head and
auger may occur.
23. Be sure the grinder is on a stable work
surface. Be sure all the grinder feet
are stable.
24. Do not let cord come in contact with
a hot surface. Do not use on a hot
surface. Check if the voltage indicated
on the appliance corresponds to the
local voltage before you connect the
appliance.
25. Wear eye protection. Wear safety
glasses. Everyday eye glasses are
not safety glasses. Safety glasses
conform to ANSI Z87.1 requirements.
NOTE: Approved safety glasses have
Z87 printed or stamped on them.
WARNING
Electrical Shock Hazard: This appliance is provided with a grounded
w
(3-prong) plug to reduce the risk of electric shock. The plug fits only one way into a
grounded outlet. Do not defeat the safety purpose of the plug by modifying the plug
in any way or by using an adapter. If the plug does not fit into the outlet, have an
electrician replace the outlet.
The length of the cord used on this appliance was selected to reduce the hazards of
becoming tangled in or tripping over a longer cord. If a longer cord is necessary, an
approved extension cord may be used. The electrical rating of the extension cord must
be equal to or greater than the rating of the appliance. The extension cord must be a
grounding-type, 3-wire cord. Care must be taken to arrange the extension cord so that
it will not drape over the countertop or tabletop where it can be pulled on by children or
accidentally tripped over.
If the cutting blade assembly locks and will not move, it will damage the motor.
Do not use. Call the toll-free customer service number for information.
840303701 v15.indd 3
SAVE THESE INSTRUCTIONS

Other Consumer Safety Information

26. Do not attempt to operate the grinder
if the grinder itself is cold. The grinder
temperature should be at least 45
(7 C) before beginning.
o
27. The gear housing and the motor
cover may become hot during
operation. This is normal. Do not
touch these parts during operation or
until they cool after use.
28. WARNING: Splintered bones can get
into the digestive tract of a pet and
cause severe damage, even death by
puncturing the walls of the intestines
or even the stomach.
29. This meat grinder is capable of
grinding smaller, softer animal bones
such as rabbit, whole chickens or
chicken quarters, and other birds,
due to both the power and all-metal
construction of the units.
30. Avoid grinding large, dense animal
bones as they are very difficult to
process (i.e., bones one would find in
large game, pigs, or cows).
F
o
3
2/21/20 10:26 AM