Storage Compartment Shelving - AGA marvel Luxury Pro+ Serie Instructions D'installation, D'utilisation Et D'entretien

Loading Tips and Suggestions
Your product is equipped with a cantilever shelf system to pro-
vide you with maximum adjustability and customization options
through the purchase of aftermarket shelving.
The basic cabinet comes with 3 glass shelves which can be
positioned anywhere in the cabinet. The glass half shelf allows
storage of tall bottles or opened wine bottles on the shelf below.
(See Figure 15). The fixed wooden bottle cradle at the bottom of
the cabinet will hold 6 bottles of wine. The wooden, bottom bot-
tle cradle may be removed for storing "jug" wines. Just remove
the two (2) screws that secure the cradle to the cabinet floor.
The bottles or cans on the top shelf directly under the light will
be exposed to a slightly higher temperature when the light is on.
Position your product accordingly and REMEMBER TO TURN OFF
THE LIGHT WHEN IT IS NO LONGER NEEDED.
Tall bottle
storage area
Glass
shelves
Wine bottle
cradle

STORAGE COMPARTMENT SHELVING

Figure 15
To Add or Remove a Shelf
Remove stored product from the shelf. Do not try to remove
a loaded shelf from the unit. Grasp the shelf front with both
hands, rotate the front upward and lift out. (See Figure 16). To
install a shelf insert the shelf in the unit and insert the hooks into
the shelf support slots and drop the shelf down so the hooks
drop over the bottom of the slots.
NOTE
Installed shelf
tang
Rear tang
(hook) on
shelf
Grasp the shelf on
the wood front
12
Make sure the shelf is secure
before loading the shelf.
Shelf support
slot
Figure 16