Dantherm DRC1 Mode D'emploi page 6

EN
User menu
Set points
Dehumidifying set point
Press for 3 sec to enter
user menu setup.
Press to confirm.
Decrease with 1 unit
Increase with 1 unit
Navigation between icons
Navigation between icons
Temperature set point
Press for 3 sec to enter
user menu setup.
Press to confirm.
Decrease with 1 unit
Increase with 1 unit
Navigation between icons
Navigation between icons
6
The humidity value and the dehumidifying icon will flash.
The display shows the desired humidity set point.
While flashing, the value can be increased or decreased by pressing Up/Increase or
Down/Decrease button on DRC1.
Press enter to confirm humidity set point and go to next menu page.
The temperature value and the heating icon will flash.
The value displayed shows the desired temperature set point. While flashing, the value can be
increased or decreased by pressing Up/Increase or Down/Decrease button on the DRC1
Maximum: 34 °C, Minimum: 5 °C. Press enter to confirm new set point and go to next menu page.