Table des Matières
Publicité
INSTALLATION
Remove the Securing screw of base connector from
the Tripod holder. And then use the screw driver to
install the wooden base on the tripod holder The
securing screw of base connector through the holes
of metal connector parts of wooden base and tripod
holder, and then lock the screw by the main nut.
Each base has one main screw & nut.
Install the Wooden base metal link pipe by the Butterfly crews.
Put the 3pcs wooden base metal link pipe at the middle of bases, and then
lock it by the butterfly screws.
Install the fan main body on the top
of the standing pipe. Please attention the
Screws position exactly.
Installez la pale sur l'arbre du moteur.
Puis, serrez la vis de fixation.
Placez la grille avant du ventilateur sur la grille arrière et maintenez-la à l'aide
des clips, puis installez la vis de fixation de la grille (voir photo ci-dessous).
Publicité
Table des Matières
