CamOne Gravity Action 3D Gimbal Manuel D'utilisation page 17

Hold the grip vertically and still, now press the On/Off- button.
The gimbal will automatically adjust itself after a few seconds. Move the grip carefully and test all
functions and movements.
Make sure that no dirt or moisture is interfering the gimbals functions!
Joystick
You can activate the gimbals modes through the joystick that is located on the grip. Press the joystick
as described below to activate the modes.
Mode 1: automatically activated after start
Gimbal works autonomously (joystick deactivated)
Mode 2: Double press >the gimbal can be controlled on the tilt and roll axis by using the joystick
Mode 3: Triple press > the gimbal can be controlled on the tilt and yaw axis by using the joystick
FAQ
Q: The stabilization is not working and the device is not holding horizontally.
A: Make sure that the battery is fully charged and repeat Step 2 of this manual. Also check that the
device is mounted correctly and is well balanced.
Q: My smartphone does not fit inside the mount.
A: Your smartphone seems not to be compatible to the mount.
Q: My smartphone does not show any picture.
A: Make sure that the smartphone is mounted correctly and that the display is pointing towards you.
Q: How long is the battery life?
A: The battery has a duration of 3 hours at normal usage.
Feel free to contact our Service & Support!
www.CamOneTec.com
(The On/Off- button is located on the battery)
17