Klein Tools 93LCLG Manuel D'utilisation page 7

MAGNETIC MOUNTING BRACKET
The instrument is attached to a magnetic mounting bracket. The bracket may be
magnetically attached to any magnetic structure such as steel studs, ducts, structural
beams, and steel doors. The bracket also features a key-hole for mounting the
instrument using a screw or nail to non-magnetic structures. Once mounted to a
structure via the mounting bracket the instrument can be rotated on the bracket
through 360° to direct the laser beams.
CLAMP-ON WALL ADAPTER
The clamp-on wall adapter may be clamped to a structural beam, or wall bracket for
suspended ceiling installations, to present a steel surface onto which the instrument's
magnetic mounting bracket may be attached. Once magnetically attached the
instrument may be positioned to deliver the laser line at the required location. The
clamp-on adapter also features a key-hole for mounting the instrument using a screw
or nail.
Adapter mounted on ceiling bracket Adapter mounted on ceiling bracket
OPERATING INSTRUCTIONS
14
Mounted via magnet Mounted via magnet
16
Mounted via keyhole Mounted via keyhole
Adapter mounted via keyhole Adapter mounted via keyhole
7