GreenWorks 51362 Manuel De L'utilisateur

High Pressure Soap Applicator
OPERATOR'S MANUAL
TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757)
WARNING:It is important to read and understand the instruction manual
before you operate this accessory.
APPLICATION
INSTALLATION
The Greenworks high pressure soap applicator allows you to use
detergent while using your pressure washer for high-pressure cleaning.
See Figures 1-3
1. Turn the attachment head counter clockwise to access the detergent
container.
2. Hold detergent container with firm grip, and add detergent.
3. Once full, install the attachment head, and securely tighten.
4. Using the quick connect coupler, install onto the pressure washer
spray wand just as you would with any type of nozzle.
ATTACHMENT
HEAD
Fig. 2
WARNING
Do not make adjustments while using the pressure washer. Stop
spraying and lock out the trigger before making adjustments. Keep
hands away from nozzle tip when spraying.
N O T E : When pointing the spray wand upward, water may discharge
from the sides of the spray wand nozzle. To stop this discharge, point
operation.
MAINTENANCE
■ Before storing, thoroughly rinse the detergent bottle to remove any
detergent residue, and allow to dry completely.
GENERAL INFORMATION
ENVIRONMENTAL PROTECTION
The packaging material can be recycled. Please do not place
the packaging into the ordinary trash for disposal, but arrange
for proper recycling.
Old appliances contain valuable material that can be recycled.
Please arrange for the proper recycling of of appliances. Please
dispose your old appliances using the appropriate collection
system.
51362
DETERGENT
CONTAINER
Fig. 1
1
2
3
PRESSURE
WASHER
SPRAY
WAND
SAFETY INSTRUCTIONS
WARNING
Please read and comply with these original operating instruction prior
to the initial operation and store them for later use or subsequent
owners.
To reduce the risk of injury, user must read and understand operator's
manual for their pressure washer before using this accessory. Fits many
brands of pressure washers up to 3000 PSI.
with side shields that are marked to comply with ANSI Z87.1 There
devices, or the unit itself. Turn the pressure washer off before changing or
adjusting accessories.
For cold water use only. Save these instructions. Refer to them frequently
and use them to instruct other users. If you loan product, loan them these
instructions also.
SYMBOL
WARNING
Don't hold the nozzle of the High Pressure Soap Applicator when it is
on.
PRODUCT INFORMATION
If any parts are damaged or missing, please call 1-888-90WORKS
(888.909.6757) for Greenworks customer service.
PRODUCT SPECIFICATIONS
Connection .......................................1/4 in. Quick Connect Plug Inlet
Maximum Pressure ....................................................Up to 3000 PSI
Maximum Water Flow..............................................................4 GPM
Maximum Water Temperature.................................................. 104°F
PROPER USE
The high pressure soap applicator is designed to apply detergent to a
variety of surfaces. It can be used for removing dirt and mold from decks,
cement patios, house siding, cars, boats, motorcycles, patio furniture,
grills, and more!.
ADJUSTING THE FLOW KNOB See Figure 4
The amount of detergent in the spray is controlled by the detergent
Turn the knob all the way
forward to use the detergent at
its highest concentration.
Turn the knob all the way back
to spray water only.
DETERGENT
FLOW KNOB
GREENWORKS hereby warranties this product, to the original
purchaser with proof of purchase, for a period of three (3) years against
defects in materials, parts or workmanship.
GREENWORKS, at its own discretion will repair or replace any and
all parts found to be defective, through normal use, free of charge to the
customer. This warranty is valid only for units which have been used for
personal use that have not been hired or rented for industrial/ commercial
use, and that have been maintained in accordance with the instructions in
the owners' manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to misuse, commercial use,
abuse, neglect, accidents, Improper maintenance, or alteration; or
2. The unit, if it has not been operated and/or maintained in accordance
with the owner's manual; or
3. Normal wear, except as noted below;
4. Routine maintenance items such as draining the water to avoid
freezing/ice damage to pump and components.
5. Normal deterioration of the exterior finish due to use or exposure.
GREENWORKS HELPLINE (1-888-90WORKS):
Warranty service is available by calling our toll-free helpline, 9am to 5pm
EST. at 1-888-909-6757 (1-888-90WORKS).
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power equipment unit
or attachment are the responsibility of the purchaser. It is the purchaser's
responsibility to pay transportation charges for any part submitted for
replacement under this warranty unless such return is requested in writing
by GREENWORKS.
USA ADDRESS: CANADIAN ADDRESS:
Greenworks Tools Greenworks Tools Canada Inc.
P.O. Box 1238 P.O. Box 93095, Newmarket, Ontario
Mooresville, NC 28115 L3Y 8K3
Fig. 3
Fig. 4
3
YEAR
ANS
AÑOS
LIMITED WARRANTY
GARANTIE LIMITÉE
GARANTÍA
LIMITADA