Additional Functions - Rika Gsm Rikatronic4 Notice D'utilisation

13. ADDITIONAL FUNCTIONS

Fan control
MultiAir stoves allow fan control via SMS.
If your stove comes with two fans, they must be controlled independently of one another.
Example SMS
1234 F1 OFF
(Please note the spaces )
1234 F1 AUTO
1234 F2 3
*Fan power can be set to levels 1-5.
Status request
You can also request status information from your stove. The relevant command is your code followed by a
question mark, for example: 1234 ?
The reply message will then contain your stove's current flame temperature (in degrees Celsius).
Reply-SMS
STANDBY - FLAME: 20C
CHECK - FLAME: 39C
IGNIT - FLAME: 80C
BURN - FLAME: 583C
ECO - FLAME: 494C
INSERT SPLIT LOG - FLAME: 264C
In addition, models with MultiAir also include the status of the fans:
Reply-SMS
STANDBY - FLAME: 25C - FAN1: OFF - FAN2: ON
LEVEL AUTO
BURN - FLAME: 598C - FAN1: ON LEVEL 3 - FAN2:
ON LEVEL 4
ECO - FLAME: 483C - FAN1: OFF - FAN2: OFF
Function
Turn off fan 1
Turn on fan 1: set to auto mode
Turn on fan 2: set to power level 3*
Stove in standby mode, flame temperature 20°C
Checking filling level, flame temperature 39°C
Igniting, flame temperature 80°C.
Stove running, flame temperature 583°C.
Stove in ECO mode, flame temperature 494°C.
Reload stove, flame temperature 264°C
Standby mode, flame temperature 25°C, fan 1 off,
fan 2 in auto mode
Stove running at 598°C flame temperature, fan 1
on at level 3, fan 2 on at level 4
ECO mode at 483°C flame temperature, both fans
off
Reply-SMS
FAN1: OFF
FAN1: AUTO
FAN2: 3
Meaning
Meaning