Channel Menu - Haier LET19T1000H Manuel De L'utilisateur

3). Channel tuning will commence. This operation
may take up to 6 minutes. The display will show
the progress of the tuning and the number of
channels found.
4). If you want to skip the ATV tuning, press the
MENU button to interrupt the tuning half way.
A pop-up screen will be displayed, press the
button to select YES to confirm. You will then go
straight to DTV tuning.
You may repeat the above step if you also want
to skip the DTV tuning. An installation reminder
will appear the next time you turn on the TV.
5). After tuning is complete, the channels are
arranged in a preset order. If you wish to skip
channels, modify the preset order or rename
channels, select P rogramme Edit under the

Channel menu.

6) Congratulations
P.17
1
Programme(s)
Programme(s)
Programme(s)
Programme(s)
Congratulations!!!
Completed Initial Quick Setup.
Enjoy your Haier TV
Press OK to Exit
1. CHANNEL MENU
1. 1 Auto Tuning (DVB-T)
1). Press the MENU button and then press the
buttons to select the CHANNEL menu
and then press the OK button.
2). Press the buttons to select Auto Tuning
and then press the OK button.
CHANNEL
Auto Tuning
PICTURE
SOUND
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
STIME
Signal Information
CI Information
OPTION
Software Update(USB)
LOCK
3). Press the buttons to select DVB-T/
DVB-C Press select DVB-T and then press
the OK button to confirm.
4). In the Tune Type menu, press the
select ATV / DTV / DTV + ATV. Press the
and then press the
country where you will operate the TV. Press the
OK button to confirm
OK
MENU MOVE OK OK
buttons to
button
buttons to select the