Assembly & Installation - Pro-Point 8796534 Manuel D'utilisateur

V1.1
(CE) and Canadian Centre for Occupational Health and Safety
(CCOHS).
WARNING! All wiring should be performed by a qualified electrician.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in a
malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for
damage. Make sure that all items in the contents are included.
Contents: • Winch
IDENTIFICATION KEY
A Retract Button
B Motor Terminal
C Motor
D Steel Cable
E Clutch
F Tethered Remote
G Release Button
H Remote Cable
I Hook
J Hook Strap
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included Parts
List. Letter references in parenthesis (A) refer to the included
Identification Key.
MOUNTING THE WINCH
Four 5/16 in. screws, lock washers, washers and nuts, SAE Grade 5 or
higher, are required to permanently mount the winch. This hardware is
not included with the winch.
Visit www.princessauto.com for more information
2,000 LB 12V DC ELECTRIC WINCH
• Tethered Remote
8796534
Fig. 1
7