Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TROUBLESHOOTING
PROBLEM
Pump does not
pump water.
The pump fails
to operate.
The performance
of the pump is not
satisfactory.
Back cover
POSSIBLE CAUSE
1. No power.
2. Reservoir is not full.
3. Fountain reservoir is too dirty.
4. Dirt stuck on pump water intake.
5. Pump impeller is not moving.
6. Pump is not assembled correctly.
7. There is air in the pump and tube.
1. No power.
2. Dirt stuck on the pump.
1. The water does not flow evenly.
2. Dirt stuck on the pump impeller.
Water outlet
Main body
Impeller assembly

CORRECTIVE ACTION

1. Make sure the power cord is
properly connected.
2. Refill by pouring water into
reservoir.
3. Make sure reservoir has no
dirt or other impurities.
4. Make sure the pump's water
intake is not obstructed and
clean properly.
5. Slowly turn the impeller to see
if it is broken or jammed.
Remove any debris.
6. Disconnect the power supply
and check pump assembly.
7. Pull the cord out of the electrical
outlet several times to clear the
pump and tube of air.
1. Check to make sure the power
cord is plugged in and the pump
is getting power.
2. Make sure the pump outlet
and any tubing, fountain, etc.,
is not kinked or obstructed.
1. Make sure the pump is
completely submerged in water.
Adjust flow control.
2. Make sure the impeller and
the housing are clean.
Front cover
Water regulator
Lowes.com/gardentreasures
6

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

0751626

Table des Matières