Care & Maintenance; Resetting The Motor Thermostat - Ninja Auto-iQ BL490 Serie Instructions

Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any blade assembly and before
cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1 Separate/remove all parts from each other.
2 Hand Washing: Wash the containers, lids and blade
assemblies in warm, soapy water. When washing the
blade assemblies, use a dish-washing utensil with a
handle to avoid direct hand contact with blades. Handle
blade assemblies with care to avoid contact with sharp
edges. Rinse and air dry thoroughly.
Dishwasher: The containers, lids and blade
assemblies are all dishwasher safe. The lids and blade
assemblies are top rack dishwasher safe. Ensure that
the blade assemblies are removed from the containers
before placing in the dishwasher.
WARNING: Handle the blade assemblies with care
when washing, as the blades are sharp. Contact
with the blades' edges can result in laceration.
3
Wipe the motor base clean with a damp cloth.
Please call customer service if any servicing needs to be
performed on the appliance at 1-877-646-5288.
15 1-877-646-5288
HOW TO STORE
1 Store the Ninja Auto-iQ
®
assembly inside the corresponding container with the
lid secured on top. Do not place anything on top. Store
the rest of the attachments in a safe place where they
will not be damaged and won't cause harm. Wrap the
power cord around the cord wrap on the back of the motor
base.
NOTE: Do not store blended or unblended
ingredients in the Nutri Ninja Cup with the blade
assembly attached.

RESETTING THE MOTOR THERMOSTAT

The Ninja Auto-iQ Blender features a unique safety
system which prevents damage to the unit's motor and
drive system should you inadvertently overload your
appliance. If the appliance is being overloaded,
the motor will stop. Allow the appliance to
cool for approximately 15 minutes. To reset the
appliance, follow the resetting procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the blade assembly or attachments.
3
Allow the appliance to cool for approximately 15
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
Blender upright with the blade
™