GOON 99389 Instructions D'utilisation Et De Sécurité page 4

SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE
Parts
To Assemble
1. Remove the Base Screw from the bottom of the Fan Assembly by turning
it counterclockwise with tool.
2. Place the bottom of the Fan Assembly into the Base, and then replace
the Base Screw.
3. Remove the Spinner from the Motor Shaft by turning them in the
direction of the arrow marked LOOSEN and
the Locking Nut by turning it
counterclockwise.
4. Align and place the Rear Guard, Handle on
top, on the Motor Shaft and against the Motor
Housing (see Fig. 1).
4