Bestway 58500 Manuel D'utilisation page 6

Assembly
1. Carefully remove all components from the package
and check to ensure nothing is
damaged. If equipment is damaged,
immediately notify the retailer from
where the equipment was purchased.
2. The sand filter should be placed on
solid, level ground, preferably a concrete slab.
Position the sand filter so the Ports and Control Valve
are accessible for operation, servicing and winterizing.
3. The sand filter to be vertically fixed on ground or a
certain pedestal made of wood or concrete before use
to prevent the sand filter from accidentally falling. Fully
assembled sand filter will exceed 18 kg. The mounting
holes should be 8 mm in diameter and spaced 86 mm
apart. Use two bolts and nuts with a maximum of 8mm
in diameter to fasten the sand filter to the pedestal.
(You will need a screwdriver.)
6
86 mm
Ф8 mm