GENERAL INTRODUCTION
This guide gives the basic instructions for installing the network video camera and explains how to access it.
For further details refer to the user manual.
Mini-cube network video camera
Brightness sensor
Ethernet port
WPS/Reset
Button
*Note:
1) SIP button: alarm activation via SIP call. After pressing this button, the camera will call the SIP phone.
2) WPS button: press this button first and then the router's WPS button to automatically set up the wireless
connection.
Microphone
Lens
IR LED
Connector to
power supply
Connector to
I/O alarms
LED lights
Speaker
PIR sensor
Micro-SD card
slot
SIP button