Set Master Valve Or Pump - Nelson Turf EZ Pro Jr. 8300 Serie Manuel D'installation Et De Programmation

PROGRAMMING INSTRUCTIONS - PROGRAM MODE
Set Master Valve or Pump Delay
You can delay the time between when the Master Valve/Pump turns on and the
time the zones start. Turn the large dial to Zone Run Times. Press both the
SELECT '+' and SELECT '–' keys together. Use the ADJUST '+' or '–' key to
adjust the time delay. The LCD will show the time of the delay (Adjustable
between 1 second – 30 minutes) with "del" underneath. To return to setting
the Zone Run Times, press both the SELECT '+' and SELECT '–' keys together.
NOTE: The Master Valve/Pump Delay will be the same for all 3 programs
(A, B, and C).
PROGRAMMING INSTRUCTIONS - AUTO MODE
Set the Rain Sensor Bypass
The EZ Pro ™
controller to water even if the rain sensor is tripped. To activate bypass the
controller must be in AUTO Mode. While in Auto Mode press both the SELECT
'+' and SELECT '–' keys together. The Sensor Suspend symbol will flash. To
deactivate Press both the SELECT '+' and SELECT '–' keys together, while in
AUTO Mode. This will cause the Sensor symbol to stop flashing and show the
current rain sensor status.
NOTE: Rain Sensor Bypass will remain on until it is deactivated.
20
Jr. is equipped with a Rain Sensor Bypass. This will cause the