Operating Modes; Meter Specifications - AimTTi EX752M Mode D'emploi

OPERATING MODES

Mode Selection:
Mode A:
Mode B:
Mode C:

METER SPECIFICATIONS

Meter Types:
Meter Resolutions:
Meter Accuracies:
Operating Modes:
GENERAL
AC Input:
Power Consumption:
Operating Range:
Storage Range:
Environmental:
Safety & EMC:
Size:
Weight:
By front panel rotary switch.
Independent outputs each capable of 0-75V at 0-2A.
Output 2 only active, 0-75V at 0-4A.
Output 1 disabled.
Output 2 only active, 0-150V at 0-2A.
Output 1 disabled.
Dual 3 digit meters with 14mm (0.56") LEDs. Reading rate 4 Hz.
100mV, 10mA
Voltage 0.3% of reading ± 1 digit,
Current 0.6% of reading ± 1 digit
Output 1 meters are blanked in Modes B and C.
110V-240V AC ±10%. Installation Category II.
500VA max.
+5ºC to +40ºC, 20% to 80% RH.
−40ºC to + 70ºC.
Indoor use at altitudes up to 2000m, Pollution Degree 2.
Complies with EN61010-1 & EN61326-1.
For details, request the EU Declaration of Conformity for this
instrument via http://www.aimtti.com/support (serial no. needed).
260 x 160 x 320mm (WxHxD).
4.3kg
3