Gewiss GW 96 844 Mode D'emploi page 32

Sunset ON / Sunrise OFF
SUNSET ON
SUNRISE OFF
SELECT CHL
DAY CHL ON
MINUTES OFFSET
OFF PERIODE
1. Confirm SUNSET ON / SUNRISE OFF by pressing OK.

Free memory locations are briefly displayed.
2. When prompted, select channels  and confirm by pressing   OK

The weekday display is flashing.
3. Select the desired days  and confirm by pressing 
4. Enter minutes for the OFFSET (+/-) 
Offset can be used to offset the ON and OFF switching times of the Astro
program. This is done in order to adapt them to the local conditions.
Example SUNSET ON / SUNRISE OFF:
Offset = + 00:15 The time switch switches ON 15 minutes after the
calculated sunrise and switches OFF 15 minutes after the calculated
sunset.
5. Select the OFF PERIOD: YES or NO

Select YES to set the time period (hours and minutes) during
which the time switch should switch off, e.g. nighttime switchoff
from 23 - 5 h.

Select NO to set no OFF period.
OK
OK
*
OK
OK
H CHL OFF
MIN CHL OFF
DAY CHL OFF
YES
OK
32
OK
OK
**
CHANNEL ON
H CHL ON
MIN CHL ON
SAVED

OK
YES
OK
OK
OK