INELCO 1660 Mode D'emploi page 6

SPACE HEATER 18 kW / 22 kW
GB
Operating Instructions
Connection
Connect space heater to mains supply through plug. Be sure to mount plug correctly.
Operation
Switch on unit and start space heater by adjusting the function switch (1) to the position required:
1/2
O
In general
The space heater is equipped with an adjustable thermostat. The temperature required is set by means of the
adjustment button (2) after which the heater runs automatically. Before switching off the heater, it is
recommended to interrupt the heating elements and to change over to Fan for a couple of minutes in order to
cool the unit before switching over to Off or before interrupting the mains supply.
Type ....A PV (Post Ventilation) The fan will stop a couple of minutes after the adjustable thermostat has
been disconnected.
NB!
Do not cover space heater.
Protect it against heavy dust and damp and do not use it outdoors in rainy weather.
The space heater is not designed for permanent mounting.
Maintenance
Clean the space heater with compressed air when it is disconnected from the mains.
GUARANTEE
KEEP VALID RECEIPT OR GUARANTEE CARD
To obtain guarantee within the guarantee period, it is an absolute MUST that either a valid receipt or the
guarantee card is submitted to the service station together with the appliance.
6
1/1
1/2
1/1
1
Fan
O
Off
MAX
MIN
2