Dentle zip Mode D'emploi page 6

CONTENTS
- Electric Toothbrush (1)
- Brush Head (2), On/Off Button (3), Battery
Cover (4), Case (5)
TECHNICAL DATA
- Battery: 1 x 1.5V AAA size alkaline battery
- Dimensions: width 22.2mm, length
221.5mm (with cover)
- Weight: 40.5g (with cover and battery)
- Main unit: IPX4
SPECIFICATIONS
- Vibrates 23,000 times per minute
- A new alkaline battery lasts for up to three
months when brushing twice a day for two
minutes each time
INSTRUCTIONS
Assembly
1. The toothbrush comes in two parts that are
easy to assemble.
2. Simply insert the toothbrush into the cover
and it becomes a normal-sized toothbrush.
Brushing your teeth
1. Begin by dipping the brush head into
water. Then squeeze out a small amount of
toothpaste onto the brush head.
2. Avoid splashing by waiting until the
toothbrush is in contact with your teeth
before turning it on.
3. Brush your teeth for about two minutes.
Move the brush head from tooth to tooth.
Begin by brushing the outside surfaces,
then the inside ones and, finally, the
chewing surfaces.
4. Rinse the brush head when you have
finished and let it dry.
Changing the brush head
1. Remove the old brush head by turning
the brush head in an anti-clockwise
direction and then pulling it straight up.
2. Attach the new brush head by pressing
it down and then turning the brush head
in a clockwise direction.
ENGLISH